Haas Commercial: 2000 Series

2000 Series

FEATURES

  • 2"-Thick CFC-Free Polyurethane
  • 17.66 Calculated R-Value
  • 26-Gauge Galvanized Steel
  • Air Infiltration Seal
  • Full Thermal Break
  • Available with Wind Load
  • 21 Color Options
  • Industry Leading Warranty
  • 10-Year Rust & Delamination
  • 6-Year Hardware
  • 3-Year Spring
  • 2" or 3" track
  • Double steel end stiles
  • Exhaust port
  • Cam safety device
  • Spring bumpers
  • Chain hoist
  • High cycle springs
  • High cycle rollers
  • Glazing (windows)
  • Aluminum full view section
  • Pass door
  • Keyed lock

The Strength To Keep Out Noise And Weather

Haas 2000 Series commercial insulated steel doors are manufactured with the elements in mind. They will enhance the beauty of your building while at the same time, insulate and dampen outside noise. Choosing high R-Value sectional doors combined with an air infiltration seal will help increase energy efficiency and savings. Polyurethane insulation provides the highest R-Values available in sectional steel doors. 2000 series doors are reinforced with roll-formed galvanized steel struts and double-end hinges, as required to meet wind load specifications and to comply with ANSI/DASMA 102-2004. The protective coating system is found on both the interior and exterior steel.


2000 Series Quick Reference Guide

Model Panel Door Thickness R-Value* Max Door Size End Stile Type Section Skins Color & Window Oprions
Width Height Inside Outside
2010 2" (50.8mm) 17.66 18'-2" 16'-0" Extruded End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Flush
Woodgrain Steel
All Colors
except bi-directional woodgrains
2012 2" (50.8mm) 17.66 18'-2" 16'-0" Extruded End Cap 26 GA V-Groove
Woodgrain Steel
26 GA V-Grrove
Woodgrain Steel
All Colors
except bi-directional woodgrains
2014 2" (50.8mm) 17.66 38'-2" 32'-0" Steel 26 GA V-Groove
Woodgrain Steel
26 GA Flush
Woodgrain Steel
All Colors
except bi-directional woodgrains
2016 2" (50.8mm) 17.66 38'-2" 32'-0" Steel 26 GA V-Groove
Woodgrain Steel
26 GA V-Grrove
Woodgrain Steel
All Colors
except bi-directional woodgrains
2032 2" (50.8mm) 17.66 24'-2" 32'-0" Steel 26 GA V-Groove
Woodgrain Steel
20 GA
Smooth Steel
Polar White & Brown
2033 2" (50.8mm) 17.66 38'-2" 32'-0" Steel 26 GA V-Groove
Woodgrain Steel
20 GA V-Groove
Smooth Steel
Polar White & Brown
2032-20 2" (50.8mm) 17.66 24'-2" 32'-0" Steel 20 GA V-Groove
Smooth Steel
20 GA
Smooth Steel
Polar White & Brown
2033-20 2" (50.8mm) 17.66 38'-2" 32'-0" Steel 20 GA V-Groove
Smooth Steel
20 GA V-Groove
Smooth Steel
Polar White & Brown
2050 2" (50.8mm) 17.66 38'-2" 32'-0" Steel 24 GA V-Groove
Stucco Aluminum
24 GA V-Groove
Stucco Aluminum
Trinar Polar White &
Trinar Almond
2051 2" (50.8mm) 17.66 38'-2" 32'-0" Steel 24 GA V-Groove
Stucco Aluminum
24 Flush
Stucco Aluminum
Trinar Polar White &
Trinar Almond
2060
2072
2082
2" (50.8mm) 17.66 24'-2" 32'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Ribbed Short Panel
Woodgrain Steel
All Colors
2061
2071
2081
2" (50.8mm) 17.66 24'-2" 32'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Recessed Short Panel
Woodgrain Steel
All Colors
2063
2073
2" (50.8mm) 17.66 18'-2" 16'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Recessed Long Panel
Woodgrain Steel
All Colors
2064
2074
2" (50.8mm) 17.66 18'-2" 16'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Ribbed Long Panel
Woodgrain Steel
All Colors
2070 2" (50.8mm) 17.66 24'-2" 32'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Ranch Panel
Woodgrain Steel
All Colors
2080 2" (50.8mm) 17.66 24'-2" 32'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Raised Panel
Woodgrain Steel
All Colors
2090 2" (50.8mm) 17.66 24'-2" 32'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Sculptured Panel
Woodgrain Steel
All Colors

*calculated R-Value

Note: Certain weights and/or applications may limit the size allowed

Available Colors

All colors are not available in every model number. Refer to the chart above for color availability.

Colors are not exact due to the differences in monitors. Refer to samples at United Garage Door Columbus for exact color match. Call (614) 274-4414

Standard Colors


Polar White

Almond

Sahara Tan

Sandstone

Gray

Charcoal

Bronze

Brown

Hunter Green

Premium Colors

Trinar® colors carry a 35-year finish warranty, making them ideal for projects that require extra-long lasting durability and beauty. Cool Black includes a cool chemistry paint finish but is not recommended for projects with extreme exposures to heat and sunlight.


Trinar® White

Trinar® Beige

Trinar® Brown

Cool Black

Woodgrain Colors

The pre-painted wood grain finish is baked on to ensure a durable and long lasting door. Steel wood grain colors feature a 10 year finish warranty. Learn more.

Bi-Directional Woodgrains

A vertical wood grain pattern on the panel and stile contrasting with a horizontal pattern on the rails creates the appearance of a real wood door. Bi-directionals feature a light stucco embossment.


Ash

English Oak

American Walnut

Mahogany
Uni-Directional Woodgrains

These authentic colors feature a woodgrain pattern that runs horizontally to complement any of our insulated steel models. Uni-directionals feature a wood grain embossment.


Ash

English Oak

American Walnut

Mahogany

Decorative Hardware


Hinges Optional

Handles Standard

Technical Information

Full Thermal Break

A full Thermal Break is used in the tongue-and-groove construction of all commercial insulated doors. This rigid vinyl extrusion seals the joints and minimizes metal-to-metal contact between door sections, which limits the transfer of temperature. This also provides optimum water and wind resistance.


Unique Paint System

All Haas steel garage doors include a three-tier, corrosion-resistant protective paint system with a polyurethane primer and durable polyester finish coat on the interior and exterior. Haas Door's paint thickness is one of the highest in the industry and many of the 2000 Series doors are available in 21 colors.


Air Infiltration Seal

2000 series doors include Air Infiltration Seals, which exceed the ASHRAE 90.1 Standard when installed with standard bottom seal and commonly available rigid/flexible vinyl door stop.

A full thermal break is used in the tongue-and-groove construction of all commercial insulated doors. This rigid vinyl extrusion seals the joints and minimizes metal-to-metal contact between door sections, which limits the transfer of temperature. This also provides optimum water and wind resistance.


Weather Seal

A full-length, one-piece heavy vinyl bottom weather seal prevents infiltration of air, rain, snow and debris. The seal reduces impact shocks when the door is closed against concrete flooring.


Pass Door

Custom pass doors are available on the 2000 and 700 Series.


Full View

Optional full view sections provide maximum light and visibility with available insulated glazing.


Hard Working Hardware

The track is 2" or 3" galvanized steel, depending on door size, with bracket mount for wood jambs or continuous reverse mounting for steel jambs. For angle-mount track, door widths are 2" wider than the opening. Track rollers are 2" or 3" case-hardened inner and outer steel races with 10-ball pre-lubricated bearings.

Hinges, brackets and reinforcing struts are hot-dipped galvanized steel. Fasteners are placed for maximum corrosion resistance. Counterbalancing springs are torsion type, computer calibrated to match door load. This provides a 10,000-cycle life at the minimum; optional spring wires can achieve 25,000, 50,000 and 100,000 cycle requirements. Springs are wound from oil-tempered wire and mounted on a continuous cross header tube or solid shaft, as determined by torque load.


The E-Strut and Wind Load

The E-Strut is the next generation of strut dsign. Conceived, developed and manufactured by Haas Door, testing has proven the E-Strut to outperform traditional struts.

This patented design is used on all Haas Door products. The innovative E-Strut is intelligently designed to require half as many tek screws as u-bars and struts currently in use. This means less time attaching struts in the field for installers and a savings in labor expense for our dealers. E-Struts are available in 2", 3", 4" and 6" widths and come standard in a galvanized finish. The 4" and 6" sizes do not require hinge straps. Haas Door products are available in a wide range of design pressures for wind load requirements. Contact your local Haas Door dealer for more information about wind load requirements in your area.


The Strength To Keep Out Noise and Weather

Haas commercial insulated doors stand up to the elements while dramatically decreasing exterior noise and enhancing the overall aesthetics of your building at the same time.

Choosing one of our insulated doors will help increase energy savings, as our CFC-free polyurethane provides one of the highest R-Values available in sectional doors. Haas garage doors are made from steel that contains 80% recycled material. They are reinforced with roll-formed galvanized steel struts and double-end hinges, as required to meet wind load specifications and to comply with ANSI/DASMA 102-2004. The protective coating system is found on both the interior and exterior steel.


CFC-Free Polyurethane Construction

The polyurethane foam in a Haas garage door section is fully enclosed inside the steel skins. This design puts the insulation properties of polyurethane foam far ahead of polystyrene foam for performance and value.

Polyurethane foam is a two-part system. It begins with two chemical blends that when mixed together expand and cure to fill the garage door panel. During the expansion, the foam completely fills the inside of the panel and becomes fully adhered to the steel skins of the garage door panel to form a composite structure that is of exceptional strength and rigidity. Polyurethane foams are very stable when encapsulated inside a garage door section. Insulating with polyurethane provides a superior product with higher insulation properties and a stronger unitized section.